120
3
Taking Pictures
4
Press the MENU button.
The camera returns to capture status.
Tilt icon in the capture mode
R (green): The camera is level.
S/T (yellow): The camera is tilted.
U/V (red): The camera is extremely tilted.
You can assign a function to the Green button and recall it quickly by
simply pressing the Green button. This is useful for going straight to the
setting screens of frequently used functions.
The following functions can be assigned to the Green button:
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Green
Button].
For examples of the Electronic Level display 1Electronic level display
(p.26)
Calling Up a Specific Function
• 9 (Green) Mode • Recorded Pixels
• EV Compensation • Sensitivity
• The Green button setting can be returned to its default setting by
selecting [Reset] on the [W Setting] menu.
• The functions other than 9 (Green) mode can be set in the usual
manner on the [A Rec. Mode] menu.
• You cannot save different settings for the same function on the Green
button and on the [A Rec. Mode] menu.
To Assign a Function to the Green Button
14:2514:25
3838
02/02/2012
To Next Page
Loading...
Need help?
General
