199
7
Viewing Images on a Computer
Set the device to which the camera is connected with the USB cable.
1
Turn your camera on.
2
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) twice.
3
Use the four-way controller (23) to select [USB
Connection].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23)
to select [MSC].
6
Press the 4 button.
The setting is saved.
Setting the USB Connection Mode
Make sure to set the USB Connection mode before connecting your
camera to the computer. You cannot perform the following setting if the
camera is connected to your computer with the USB cable.
Setting
1/3
Date Adjustment 01/01/2012
Sound
World Time
Folder Name
Language/ English
MSC
PTP
MENU
OK
OK
Cancel
USB Connection
To Next Page
Loading...
Need help?
General
