Pentax OPTIO VS20 User Manual

110
3
Taking Pictures
Set the sensitivity range when the sensitivity is set to AUTO.
You can select from 100-200, 100-400, 100-800, and 100-1600.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [AUTO ISO
Range].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to select the sensitivity
adjustment range.
5 Press the 4 button.
The setting is saved.
6 Press the 3 button.
The camera returns to capture status.
• In movie recording mode or the shooting mode is set to 9 (Green)
mode, only AUTO (sensitivity 100 - 800) is available.
• When set to c (Digital SR) mode, only AUTO (sensitivity 100 - 6400)
is available.
• If you change the [Sensitivity] setting frequently, you can save time by
assigning it to the Green button (p.120).
Saving the sensitivity setting 1p.128
Setting the AUTO ISO Range
When [Highlight Correction] in [D-Range Setting] is set to O (On), select
from 200-400, 200-800, and 200-1600.
Rec. Mode
1/4
OK
OK
MENU
Cancel
Recorded Pixels
White Balance AWB
Sensitivity
EV Compensation
AF Setting
AWB
Auto
AUTO ISO Range
0.0
ISO100-200
ISO100-400
ISO100-800
ISO100-1600

Pentax OPTIO VS20 Specifications

General

Brand	Pentax
Model	OPTIO VS20
Category	Digital Camera
Language	English