Pentax OPTIO VS20 - Using the Self-Timer

90
3
Taking Pictures
1 After shooting the first frame in Step 6 or second frame
in Step 7, press the 4 button or the four-way
controller (3).
A confirmation dialog appears.
2 Use the four-way controller (23)
to select an option and press the
4 button.
Save: Saves the captured image(s)
and you can retake the first
frame. When this option is
selected after shooting the
second frame, the first and the second frames are stitched
and a stitched image appears.
Discard: Discards the captured image(s) and you can retake the first
frame.
Cancel: Returns to the previous shooting screen.
In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod when taking a picture with the self-timer.
To Cancel after Taking the First or Second Frame
Using the Self-timer
g
Use this mode when you want to be included in a group picture. The picture
is taken approximately ten seconds after the shutter release button is pressed.
Z
Use this mode to avoid camera shake. The picture is taken approximately two
seconds after the shutter release button is pressed.
Save
Discard
Cancel
Save the image(s) and
exit this screen?
Save the image(s) and
exit this screen?
OK
O K
OK