Pentax OPTIO VS20 - Changing the Video Output Format

185
6
Settings
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) twice.
2 Use the four-way controller (23) to select [Folder
Name].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23) to select [PENTX] or
[Date].
5 Press the 4 button.
The setting is saved.
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) twice.
2 Use the four-way controller (23) to select [Video Out].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to select video output format.
Choose a video output format to match the
input format of the AV equipment.
Changing the Video Output Format
Setting
2/3
Power Saving
Reset
Auto Power Off
3min.
5sec.
Video Out
Brightness Level
MENU
CancelCancel OK
OK
OK OK
NTSC
PAL
Delete all