Pentax OPTIO VS20 - Taking Still Pictures; Taking Pictures

64
3
Taking Pictures
Taking Still Pictures
The Optio VS20 features a wide range of shooting modes and functions
to suit almost any subject or scene. This chapter describes how to take
pictures with the most commonly used standard settings (the factory
default settings).
1 Press the power switch.
The camera turns on and is ready to take still pictures. In this manual,
this is called Still Picture Capture Mode.
2 Confirm the subject and shooting
information on the display.
The focus frame in the middle of the display
indicates the zone of automatic focusing.
When the camera detects a face, the Face
Detection function is activated and the face
detection frame appears (p.69).
Taking Pictures
Zoom lever
Shutter release button
Power switch
Shutter release button
for vertical shooting
Zoom lever for vertical
shooting
14:25
1 4 : 2 5
14:25
38
3 8
38
0 2 / 0 2 / 2 0 1 2
02/02/2012
Focus frame
14:25
1 4 : 2 5
38
3 8
0 2 / 0 2 / 2 0 1 2
02/02/2012
38
14:25
Face detection frame