Pentax OPTIO VS20 - Adjusting the Brightness of the Display

186
6
Settings
5 Press the 4 button.
The setting is saved.
You can adjust the brightness of the display.
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) twice.
2 Use the four-way controller (23) to select [Brightness
Level].
3 Use the four-way controller (45)
to adjust the brightness.
F Dark
G Normal
H Bright
4 Press the 3 button.
The camera returns to A mode or Q mode.
The display appears with the set brightness.
Depending on the country or region, images may fail to be played back
if the video output format is set differently from the one in use there. If
this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.149
Video output format of each city 1p.221
Adjusting the Brightness of the Display
Setting
2/3
Power Saving
Auto Power Off
3min.
5sec.
Video Out
Brightness Level
MENU
CancelExit
NTSC
Delete all
Reset