Pentax OPTIO VS20 - Framing Your Pictures (Frame Composite Mode)

84
3
Taking Pictures
5 Press the 4 button.
The selected icon appears and the camera
returns to capture status.
6 Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
7 Press the shutter release button fully.
The picture is taken.
In N (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select N and
press the 4 button.
A 9-frame display of the frame selection screen appears.
Framing Your Pictures (Frame Composite Mode)
1 4 : 2 5
14:25
3 8
38
0 2 / 0 2 / 2 0 1 2
02/02/2012
Four-way controller
4 button
Zoom lever
Shutter release button
Zoom lever for vertical shooting
Shutter release button for
vertical shooting