Pentax OPTIO VS20 - Default Settings

216
8
Appendix
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is turned off.
No : The setting returns to the default setting when the camera is turned off.
* : The setting depends on the [Memory] setting (p.128).
—:N/A
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (p.191).
No : The setting is saved even after reset.
—:N/A
[A Rec.Mode] Menu Items
Item Default Setting
Last
Memory
Setting
Reset
Setting
Page
Recorded Pixels m (4608×3456) Yes Yes p.103
White Balance F (Auto) * Yes p.105
AF
Setting
Focusing Area J (Multiple) Yes Yes p.101
Focus Assist O (On) Yes Yes p.102
Sensitivity AUTO * Yes p.109
AUTO ISO Range ISO100-800 * Yes p.110
EV Compensation ±0.0 * Yes p.107
D-Range
Setting
Highlight Correction P (Off) Yes Yes
p.108
Shadow Correction P (Off) Yes Yes
Shake Reduction O (On) Yes Yes p.112
Face Recall — — — —
Face Detection O (On) * Yes p.117
Blink Detection O (On) Yes Yes p.118
Digital Zoom O (On) * Yes p.76