Pentax OPTIO VS20 - Page 103

101
3
Taking Pictures
You can change the autofocus area (Focusing Area).
1 Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23) to select [AF Setting].
3 Press the four-way controller (5).
The [AF Setting] screen appears.
4 Press the four-way controller (5).
A pull-down menu appears.
5 Use the four-way controller (23)
to change the focusing area
setting.
6 Press the 4 button.
The setting is saved.
7 Press the 3 button twice.
The camera returns to capture status.
To Set the Focusing Area
J
Multiple Normal autofocus area
K
Spot The autofocus area becomes smaller.
W
Automatic Tracking AF Keeps moving subjects in focus.
• In movie recording and N (Frame Composite) modes, the Focusing
Area cannot be set to W.
•In 9 (Green) and b (Auto Picture) modes, the Focusing Area is fixed
at J.
AF Setting
MENU OK
Focusing Area
Focus Assist
OK
Cancel