102
3
Taking Pictures
The camera automatically emits the focus assist light in dark shooting
situations. You can set the light to on or off.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AF Setting].
3
Press the four-way controller (5).
The [AF Setting] screen appears.
4
Use the four-way controller (23)
to select [Focus Assist].
5
Use the four-way controller (
45
) to select
O
(On) or
P
(Off).
The setting is saved.
6
Press the 3 button twice.
The camera returns to capture status.
To set the = Assist Light (Focus Assist)
Looking at the light directly will not create a safety hazard. However, do
not look into the focus assist light from a very short distance since you
may feel dazzled.
• The camera does not emit the focus assist light under the following
conditions.
- In movie recording mode
- S (Fireworks) or H (Pet) mode
- When the focus mode is set to s (Infinity) or \ (Manual Focus)
AF Setting
MENU
Focusing Area
Focus Assist
To Next Page
Loading...
