113
3
Taking Pictures
3
Use the four-way controller (45)
to select O or P.
O Corrects camera shake.
P Does not correct camera shake.
4
Press the 3 button.
The camera returns to capture status.
One of the following icons appears on the display.
You can register up to three faces to be detected preferentially in Face
Detection function (p.69). If the name is registered together with the face,
the name is displayed on the display when the face is detected. If
multiple faces have been registered and have priorities set, the face with
the highest priority is focused on when more than one registered face is
detected.
1
Press the MENU button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Face Recall].
M
When the shutter release button is pressed halfway with [Shake
Reduction] set to O (On).
l
When [Shake Reduction] is set to P (Off). (If the camera shake is likely
to occur, f is indicated when the shutter button is pressed halfway.)
The Shake Reduction function does not work in the following situation:
- During movie recording
Registering a Face to be Detected Preferentially
To Register the First Face
Rec. Mode
2/4
Rec. Mode
MENU
D-Range Setting
Blink Detection
Face Recall
Face Detection On
Digital Zoom
Shake Reduction
Exit
Rec. Mode
2/4
Rec. Mode
MENU
D-Range Setting
Blink Detection
Face Recall
Face Detection On
Digital Zoom
Shake Reduction
Exit
To Next Page
Loading...
Need help?
General
