Pentax OPTIO VS20 - Setting the Image Contrast (Contrast); Setting the Shake Reduction Function

112
3
Taking Pictures
You can set the image contrast level.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Contrast].
3 Use the four-way controller (45)
to change the contrast level.
F Low
G Normal
H High
4 Press the 3 button.
The camera returns to capture status.
You can set this function to correct camera shake which can occur
during shooting. The default setting is O (On).
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Shake
Reduction].
Setting the Image Contrast (Contrast)
Setting the Shake Reduction Function
Use the Movie SR function (p.125) to correct camera shake in movie
recording mode.
Rec. Mode
3/4
Saturation
Date Imprint Off
MENU
⚳
⚳
Exit
Sharpness
Contrast
Green Button
Memory