Pentax OPTIO VS20 - Taking Pictures in the Custom Settings (Program Mode)

71
3
Taking Pictures
5 Press the shutter release button fully.
The picture is taken.
In R (Program) mode, the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
Portrait ×
Backlight
Portrait × Sunset Group Photo
Text Blue Sky Sunset
The following restrictions apply in b mode:
• You cannot turn the Face Detection function off.
• The Focusing Area setting is fixed at J (Multiple).
• If (Night Scene) mode is selected when the flash mode is , (Auto)
or c (Auto + Red-eye), the flash mode automatically changes to a
(Flash Off).
• If (Night Scene Portrait) mode is selected when the flash mode is
, (Auto), the flash mode automatically changes to d (Flash On +
Red-eye) when the camera detects a face and determines that the
flash is needed.
• The EV Compensation function cannot be used.
Taking Pictures in the Custom Settings
(Program Mode)
Four-way controller
4 button
Shutter release button
Shutter release button
for vertical shooting