Pentax OPTIO VS20 - Page 123

121
3
Taking Pictures
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to choose a function and press the
4 button.
5 Press the 3 button.
The selected function is assigned to the Green button.
1 Press the Green button in A mode.
The function assigned to the Green button is called up.
2 Use the four-way controller (45)
to change the settings and press
the 4 button.
The camera returns to capture status.
To Use the Green Button
Taking Pictures in the Basic Mode (Green Mode) 1p.72
If a function other than 9 (Green) mode has been assigned to the Green
button, the camera returns to the original screen if no operation is
performed for 1 minute after the Green button is pressed.
Sensitivity
Recorded Pixels
Green Button
Q
9
1/3
MENU
Cancel
OK
EV Compensation
Green Mode
OKOK
EV Compensation
EV Compensation
EV Compensation
0.0
0 . 0
0.0