53
2.06 4.12
1.95 3.91
2.40 7.20
2.40 5.53
ddc
40 240
40 240
GB 80 40 240 2.25
1)
TRG 80 40 240 2.25
2)
Instructions for Assembly and Use – Standard Configuration
CB 160 Climbing Formwork
C1 Planning and work preparation
Platform decking
Table 2
Minimum dimensions
of the planking
1) max. width of influence ≤ 1.25 m
2) max. width of influence ≤ 1.35 m
3) Planking is to be secured against lifting.
The illustration and table conform to
Appendices K12 and K13 of Type Test CB 160
carried out by the State Structural Inspectorate
in Düsseldorf
(Inspection Certificate No. IIB 4-540-136/91)
and may only be used in accordance with the
provisions of this type test.
min. thickness [mm] min. width [mm] max. span [m]
Working platform
Finishing platform
Concreting
platform
3)
Table 3
Permissible girder spans
Static system:
Main beam
type
max. cantilever
d ≤ c/2 [m]
max. span
c [m]
Main beam
Bracket
Bracket
Girder GT 24
2 x Timber 8 x 16 or
Timber 16 x 16
2 x Girder GT 24
Timber 8 x 16
To Next Page
Loading...
