18
Controls
Fig. 7 - 02
7.03 Pedal
The function method of the
pedal depends on the select-
ed pedal mode (level or fl ip-fl op
mode), see Chapter 11.03
Further settings
7.02 Main switch
● The machine is switched on or off by
turning main switch 1.
Position "0" : Machine is switched off
Position "1" : Machine is switched on
When switching the
machine on or off, please ob-
serve the notes in Chapter 8.03
Switching the machine on and
off!
1
-1
Fig. 7 - 03
+2
+1
0
Sealing / level mode
0 = Rest position / Stop sealing process
+1 = Lower top feed roller
+2 = Engage heating element /
Sealing start
-1 = Interrupt sealing process / Raise top
feed roller
Sealing / fl ip-fl op mode
0 = Rest position
+1 = Lower top feed roller
+2 = Start / Stop sealing
-1 = Interrupt sealing process / Raise top
feed roller
To Next Page
Loading...
Need help?
General