39
Heat sealing
Description of the functions
Selecting a program
This function opens the menu for entering the program number or for selecting the produc-
tion type, see Chapter 9.02 Selecting the production type
Comment Field
This function opens the menu to allow the input of a comment (max. 20 chars.), e.g. material
assignment for the selected welding parameters.
Heat sealing temperature
These functions are used to alter the heat sealing temperature, see Chapter 9.03.01
Entering the sealing temperature.
Feed stroke (sealing speed)
These functions are used to alter the feed stroke or to open the menu for entering the feed
stroke difference, the brake and acceleration profi les and the start delay for the feed rollers,
see Chapter 9.03.02 Entering the sealing speed.
Hot wedge type (only on the PFAFF 8320-010)
These functions are used to stipulate the hot wedge type, see Chapter 9.03.03 Stipulating
the hot wedge type… The selected function appears inverse.
Nozzle type / hot air volume (only on the PFAFF 8320-020)
These functions are used to alter the hot air volume or to open the menu for stipulating the
nozzle type, see Chapter 9.03.05 Stipulating the nozzle type and hot air volume …
Roller pressure
These functions are used to alter the roller pressure, see Chapter 9.03.06 Entering the rol-
ler pressure.
10.02 Manual heat sealing
In the "Manual heat sealing" mode, all relevant parameters for the sealing operation can be
entered or altered directly, see Chapter 9.02 Selecting the production type.
● Select "manual heat sealing", see Chapter 9.02 Selecting the production type
PFAFF 8320-020
PFAFF 8320-010
To Next Page
Loading...
Need help?
General