Car and Maintenance
76
Cleaning the whole machine ......................................................................................weekly
Cleaning the hot wedge ...................................................................................... as required
Cleaning the hot air nozzle .................................................................................. as required
Grind the hot wedge ........................................................................................... as required
Clean air fi lter of air-fi lter/lubricator ..............................................................when required
Check/adjust air pressure ............................................................................daily, before use
12 Care and Maintenance
12
.01 Servicing and maintenance intervals
12.02 Cleaning
Switch off the machine and let it cool down!
Danger of burns if the heating element is touched!
● Before each start up remove any residues on the top or bottom side of the heating
wedge with a soft wire brush.
or
● Clear the opening of the hot air nozzle from sealing residues as required.
To Next Page
Loading...
Need help?
General