Adjustment
97
13.13 Description of the error numbers
13
.13.01 General errors
Display Description
ERROR: 3 Error in allocation EMS memory
ERROR: 4 C167 not reacting
ERROR: 5 Boot fi le (c167boot.bin) cannot be opened
ERROR: 6 Error in fl ash-programming
ERROR: 7 Error when opening a fi le
ERROR: 8 Battery
ERROR: 9 Firmware version confl ict
ERROR :
OPERATING DATA
CHECK SUM
(CARRY OUT COLD START)
Operating data check sum
NEW OPERATING SOFTWARE
(CARRY OUT COLD START)
New operating software
COLD START CARRIED OUT Cold start
ERROR: 101 C167-error
ERROR: 106 Error compressed air
ERROR: 107 Error air volume
(when air volume sensor is activated)
ERROR: 110 #ERROR no. Motor Error DC-motor 1
ERROR: 120 #ERROR no. Motor Error DC-motor 2
ERROR: 130 #ERROR no. Motor Error DC-motor 3
Puller (option)
ERROR: 140
#Error no. Temp. Control
Error temperature control unit
ERROR: 201 Res. speed for man. sealing outside permissible
range
ERROR: 301 Program too large
ERROR: 302 Contradiction between progpar and progload
ERROR: 303 Flash read error or progr. Defect
ERROR: 304 Memory overlow
ERROR: 305 Invalid confi guration
ERROR: 310 File not on source
ERROR: 311 Source reading error, fi le cannot be opened
ERROR: 312 Target write error, fi le cannot be opened
ERROR: 313 Source reading error
ERROR: 314 Target write error
ERROR: 315 File confi g cannot be opened
ERROR: 316 Error when opening MDAT-fi le
ERROR: 317 Write error in MDAT-fi lee
ERROR: 318 Machine data identifi cation incorrect
To Next Page
Loading...
Need help?
General