47
Heat sealing
Further functions are available for creating programs:
● Select the sealing tool by switching between heating wedge and hot air nozzle. This
makes it possible e.g. to also create programs for hot air machines on hot wedge machi-
nes.
● Select the nozzle type in accordance with the width of the nozzle installed, see Chapter
9.03.05 Stipulating the nozzle type and hot air volume …
or
● Select the hot wedge type in accordance with the width of the hot wedge installed, see
Chapter 9.03.03 Stipulating the hot wedge type …
10.03.06 Concluding programming
Once all the details for the programming have been entered, the programming can be
concluded by pressing the appropriate function key.
Description of the functions
Esc
The input is interrupted and the machine moves back to the initial state of the programming
function.
Discard alterations
All program alterations are cancelled.
Save as...
If this function key is pressed, the number panel opens to enter any program number.
Enter
All program alterations are saved under the current program number.
Example
Example
To Next Page
Loading...
Need help?
General