40
Heat sealing
Start
(This function appears when the top feed roller is lowered.)
With this function the sealing start is called up, analog to the pedal function "+2", also see
Chapter 7.04 Pedal.
Feed roller up/down
With this function the top feed roller, depending on its position, can be raised or lowered,
analog to the pedal functions "-1" and "+1", also see Chapter 7.04 Pedal.
Feed rollers in reverse
This function makes it possible to call up the reverse running function of the feed rollers.
Break
This function is used to switch off the temperature control of the heating element.
The heating element cools down.
Input menu
This function is used to call up the "input" mode, see Chapter 11 Input.
Stop
(This function appears during the sealing operation.)
This function is used to stop the sealing operation, analog to pedal function "-1", also see
Chapter 7.04 Pedal.
During the sealing process, the machine is operated by pedal and foot switch,
see Chapter 7 Controls.
To Next Page
Loading...
Need help?
General