Advanced settings
64
7.8.13 SD Card menu
From the "Settings" screen, press [Advanced] [SD card].
Load Detector
Param.
Load the saved parameters onto the SD card.
Save Detector
Param.
Save the leak detector parameters to the SD card.
View * BMP View the saved ".bmp" files.
Creating a library of the configurations for each application is recommended if
the detector is used for more than one application.
Any SD card on the market can be used except cards with High Capacity techno-
logy, regardless of the memory size. Before use, make sure that the SD card is not
locked (message "SD card not detected" displayed).
To Next Page
Loading...