Mixing pump G 4 X smart Overview - Operation and service
Description PFT Booster pump (Accessory)
2021-08-12 23
17 Description PFT Booster pump (Accessory)
17.1 Scope of application Booster pump
The PFT booster pump is mainly used as booster pump for
interposing at the mortar mixer and mortar mixing pumps with
insufficient water pressure. Moreover, it can be used as suction
pump to suck liquids from containers, to empty smaller pools and
ponds, for cellar drainage and irrigation.
The constant water supply of the PFT machine technology is
automatically ensured by means of water supply from a water
reservoir by the PFT booster pump.
A flow pressure of at least 2.5 bar with the machine in operation on
the construction side is guaranteed by means of suction from the
water reservoir.
Configuration example
Fig. 21: Booster pump and water tank
00492679 article number of booster pump
AV1000 standalone
Accessories
Suction strainer with stainless steel filter screen, suction hose
1“, 2.5m
art.-no. 00136619
17.2 Intended use
Attention!
The PFT booster pump is recommended only for
pumping of clean water, of water containing a
reasonable amount of impurities and non-
aggressive chemical liquids. Media with fibrous
and abrasive components should be avoided.
Their use is subject to the regulation of local
legislation.
To Next Page
Loading...
