Mixing pump G 4 X smart Overview - Operation and service
Transport, packing and storage
2021-08-12 29
24.3 Packaging
For packaging The individual packages have to be packed in accordance with the
transport conditions to be expected. Only environmentally-friendly
materials were used for the packaging.
The packaging should protect the individual components until the
assembly from transport damage, corrosion and other damage.
Therefore do not destroy the packaging and remove only shortly
before the assembly.
Handling packaging materials If no agreement for the recovery of the packaging has been made,
separate materials according to type and size and reuse or recycle.
ATTENTION!
Environmental damage due to wrong disposal!
Packaging materials are valuable raw materials
and in many cases they can be reused or
reconditioned and recycled.
Therefore:
Dispose of packaging materials in an
environmentally-friendly way.
Observe the applicable local disposal
regulations. If required hand over the disposal to
a specialist.
24.4 Transport
Anchor points
Fig. 28: Anchor points
Anchor the machine at the anchor points for transport by crane.
Observe the following conditions:
The crane and lifting equipment have to be designed for the
weight of the packages.
The operator has to be authorised to operate the crane.
Attachment:
1. Anchor hooks in accordance with to both crane hooks.
2. Ensure that the package is straight, possibly observe eccentric
centre of gravity.
To Next Page
Loading...
