Mixing pump G 4 X smart Overview - Operation and service
Monitoring the machine
2021-08-12 37
Fig. 48: Delivery hood
Feeding with delivery hood:
Accessory article number 20600500
Put the delivery hood instead of the grille cover.
DANGER!
Risk of injury at the star wheel!
Do not open the delivery hood during the operation
of the machine. Before opening, turn off the
master switch and interrupt the power supply.
Fig. 49: Injection hood
Feeding with injection hood:
Accessory article number 20600213
Put the delivery hood instead of the grille cover.
DANGER!
Risk of injury at the star wheel!
Do not open the machine during pneumatic
conveying. Before opening, turn off the master
switch and interrupt the power supply.
NOTE!
First feed material to the mixing pump G 4 X. Pull
the dummy connector or switch off the machine
using pressure control air. Start your work only
when the level sensor indicates full.
33 Monitoring the machine
DANGER!
Access by unauthorised persons!
The machine must be operated only if monitored.
To Next Page
Loading...
