Directions For Use
EN 25DVDR70 & DVDR75/0x1 3.
40
G
Additonal playback features
Changing to another title/chapter
If there is more than one title or chapter on a disc you can change to another title or chapter
as follows. However if there are several chapters within a title, these will be selected. The title
can then still be selected via the menu bar.
1 During playback, press O to go to the next title/chapter. Press
N to return to the start of the current title/chapter. Press
N twice to return to the start of the previous title/chapter.
Use the T/C (title/chapter) button
1 Press T/C (title/chapter) and then use CH+ A or CH- B to select the
appropriate title.
Make sure the symbol 'T' (title) is selected in the menu bar.
2 Use T/C to select chapters within a title. Press T/C and use C to
select the 'C' symbol (chapter).
Now select the appropriate chapter with CH+ A or CH- B .
Tip
Searching a disc
You can search the disc for a recording at 4x, 8x or 32x playback speed. Other speeds can only
be selected via the menu bar ('
K
').
1 During playback, press and hold N (reverse) or O (forwards) to
switch to the search feature. You can switch between the playback
speeds using N / O .
2 To continue playback, press PLAY G twice at your chosen location.
a No sound
b The sound is switched off in search mode. This is not a fault in your
machine.
Problem
Search feature via menu bar
1
During playback press SYSTEM-MENU on the remote control. The
menu bar will appear at the top of the screen.
2
Select the '
K
' symbol using C or D and confirm with CH- B .
3
You can now use the D or C button to select different forward and
backward search speeds.
4
If necessary, switch the menu bar off with the SYSTEM-MENU button.
5
To continue playback, press PLAY G twice.
Tip
Additonal playback features
39
Playing a (Super) Video CD
(Super) Video CDs may be equipped with PBC (Play Back Control). This means that special
playback functions (menus) can be directly selected. The video CD must be PBC compatible (see
CD case).
'PBC' is active in the default settings.
1 Insert a (Super) Video CD.
If the 'h' symbol appears in the display, start playback by pressing
PLAY G .
2 If a menu appears on the screen, use the remote control buttons
indicated on the screen to select the menu option you want
(PREV= N , NEXT= O ) or with the number buttons 0..9 .
If a PBC menu consists of a list of titles, you can select a title directly.
3 Use RETURN to go back to the previous menu
4 Stop playback using STOP h .
ENGLISH
playback
To Next Page
Loading...
