Directions For Use
EN 29DVDR70 & DVDR75/0x1 3.
48
Recording with automatic switchoff
(OTR onetouchrecording)
1 Insert a disc.
2 If necessary, use the MONITOR button on the remote control to
switch to the internal tuner in the DVD recorder.
3 Use CH+ A or CH- B to select the programme number (channel
name) you want to record.
4 Press REC/OTR n on the remote control.
5 Each time you press REC/OTR n you will add 30 minutes to the
recording time.
How can I cancel the recording time I have just entered?
To delete an entry, press CLEAR while the display shows the recording
time.
?
Preventing accidental erasing of discs
To ensure you don't accidentally delete a recording you can protect the entire disc. You can
only ever protect the entire disc. You cannot protect individual recordings.
What happens with DVD+R discs?
As long as these discs are not finalised, they can be protected against
accidental erasure in the same way as DVD+RW discs.
?
1 Insert the disc to be protected.
2 While the index screen is displayed press STOP h on the remote
control. The first title is highlighted.
3 Press CH+ A . This takes you to the disc info screen.
4 Press the C button.
Select the 'Protection' line.
Confirm with C .
5 Select 'Protected' with the CH- B button and confirm with OK .
6 Press D and then DISC-MENU to terminate.
Manual recording
47
C01 1:16:51 P01
Insert chapter markers
During recording you can mark scenes so you can find them or hide them
later.
During recording, press FSS & at the start point. 'Inserting marker'
appears on the TV screen. In the display, the number of the 'CHAPTER'
increases by one.
For further information on titles and chapters, see the section on 'Changing to
another title/chapter' in 'Playback'.
Tip
6 Use the STOP h button on the remote control or h on the
machine to stop the recording. 'MENU UPDT' will appear on the display.
The DVD recorder is writing the list of contents. Wait until the
message disappears from the display. The recording is then complete.
a The display will read 'DISC ERR'
b Recording could not be completed correctly because of a disc error. Check
the disc and clean it if necessary.
Problem
Making recordings on DVD+R discs compatible
If you want to play back the recording on a DVD player, you need to finalise
the disc in the DVD recorder. You can prepare your DVD for use in a DVD
player using the 'Finalising' feature. See 'Finalising DVD+R discs' in 'Managing
the disc contents'.
Tip
Interrupt recording (Pause)
1 During recording press PAUSE 9 , for example to avoid recording
the commercials.
2 To continue recording, press REC/OTR n .
End recording
To end the recording, press the STOP h button. Wait until 'MENU UPDT'
disappears from the display.
Tip
ENGLISH
Manual recording
To Next Page
Loading...
