Philips DVDR75/001 - Page 70

Diagnostic Software
EN 70 DVDR70 & DVDR75/0x15.
Nucleus Name DS_BE_ErrorLogReset
Nucleus Number 911
Description Reset the error log in the basic engine
User Input None
Example DS:> 911
091100:
Test OK @
Nucleus Name DS_BE_JitterOptimise
Nucleus Number 912
Description Perform jitter optimisation:
A formatted DVD must be loaded into the engine before executing this nucleus
User Input none
Example DS:> 912
Test OK @
Nucleus Name DS_BE_FocusOn
Nucleus Number 913
Description Put the laser of the BE into focus
User Input None
Example DS:> 913
091300:
Test OK @
Nucleus Name DS_BE_FocusOff
Nucleus Number 914
Description Turn off putting the laser of the BE into focus
User Input None
Example DS:> 914
091400:
Test OK @
Nucleus Name DS_BE_MotorOn
Nucleus Number 915
Description Turn on the turntable motor
User Input None
Example DS:> 915
091500:
Test OK @
Nucleus Name DS_BE_MotorOff
Nucleus Number 916
Description Turn off the turntable motor
User Input None
Example DS:> 916
091600:
Test OK @
Nucleus Name DS_BE_RadialOn
Nucleus Number 917
Description Close the radial loop
User Input A formatted DVD must be loaded into the engine before executing this nucleus
Example DS:> 917
091700:
Test OK @
Nucleus Name DS_BE_RadialOff
Nucleus Number 918
Description Open the radial loop
User Input None
Example DS:> 918
091800:
Test OK @