Phoenix Contact AXC F 3152 - Page 105

List of figures
107708_en_08 PHOENIX CONTACT 105 / 112
AXC F 2152 ........................................................................................ 45
Figure 4-4: Example: Axioline F station with AXC F 3152 and left-aligned
Axioline F extension module ............................................................... 46
Figure 4-5: Example: Structure of a PLCnext Inline station with the
AXC F 2152 ........................................................................................ 47
Figure 4-6: Mounting the bus base modules ......................................................... 48
Figure 4-7: Snapping the controller into place ....................................................... 48
Figure 4-8: Removing the upper marking field of the AXC F 1152 and
AXC F 2152 ........................................................................................ 49
Figure 4-9: Inserting the SD card .......................................................................... 50
Section 5
Figure 5-1: Overload range with fall-back characteristic curve ............................. 51
Figure 5-2: Overload range without fall-back characteristic curve ....................... 51
Figure 5-3: Connecting a rigid conductor .............................................................. 52
Figure 5-4: Connecting a flexible conductor .......................................................... 52
Figure 5-5: Connecting the supply connector ....................................................... 53
Figure 5-6: Connecting Ethernet ...........................................................................54
Section 6
Figure 6-1: PLCnext Engineer user interface ........................................................ 56
Figure 6-2: Start page, “Empty AXC F 2152 v.00 / 2020.0.0 project” proj-
ect template ........................................................................................ 58
Figure 6-3: Setting the IP address range ............................................................... 59
Figure 6-4: Setting the IP address ......................................................................... 60
Figure 6-5: Selecting the network card .................................................................. 61
Figure 6-6: Assigning online devices .................................................................... 61
Figure 6-7: Successful assignment of the configured controller to an on-
line device ........................................................................................... 62
Figure 6-8: “SECURE DEVICE LOGIN” dialog ...................................................... 62
Figure 6-9: Successful connection to the controller ..............................................63
Section 8
Figure 8-1: Example of AXC F 2152: Init Value Configuration for the RTC
system variable organized as a data structure (RTC_TYPE
data type) ............................................................................................ 66
Figure 8-2: Error location in the master diagnostic parameter register .................. 79
Figure 8-3: Error code in the master diagnostic parameter register ...................... 79