8 Version: 2.0.0 MS205Equ C-863 Mercury Controller
If one of the supplied components for connecting to the power source has to
be replaced, use a sufficiently dimensioned component.
2.2.1 Organizational Measures
User manual
Always keep this user manual next to the C-863.
If the user manual is lost or damaged, contact our customer service
department (p. 91).
Add all information given by the manufacturer to the user manual, for example
supplements or Technical Notes.
If you pass the C-863 on to other users, also turn over this user manual as
well as all other relevant information provided by the manufacturer.
Only use the device on the basis of the complete user manual. If your user
manual is incomplete and is therefore missing important information, property
damage can result.
Only install and operate the C-863 after having read and understood this user
manual.
Personnel qualification
The C-863 may only be started up, operated, maintained and cleaned by authorized
and qualified staff.
2.2.2 Safety Measures during Installation
Install the C-863 near the power source so that the power plug can be quickly
and easily disconnected from the mains.
Only use cables and connections that meet local safety regulations.
Connecting a stage with stepper motor to a DC motor controller can cause irreparable
damage.
Only connect to the C-863 a stage with DC motor or voice coil drive.
Connecting the USB and RS-232 interfaces of the controller to the PC at the same
time can damage the PC or the controller.
Connect either the USB or the RS-232 interface to the PC.
To Next Page
Loading...
Need help?
General
