C-863 Mercury Controller MS205Equ Version: 2.0.0 81
Modifying a stage type in a stage database
1. In the Select connected stages step in PIMikroMove, select a stage type
which you created earlier as described above. Proceed with the selection as
in step 1 of the Creating a stage type in a stage database instruction.
2. Execute steps 2 to 6 from Creating a stage type in a stage database.
3. In the Save Parameters as User Stage Type dialog, save the modified
parameter values as a new stage type:
a) Leave the entry in the Parameters of axis: field unchanged.
b) Leave the entry in the Save as: field unchanged.
c) Click on OK.
d) In the Stage type already defined dialog, click on Change settings. The
Save Parameters as User Stage Type dialog closes automatically after
a short time.
The parameter values of the stage type have been updated in the
PI_UserStages2.dat stage database and in the main window of PIMikroMove.
10.3 Parameter Overview - see detailed user manual
You can find information on this topic in the detailed MS205E user manual which is
included as a PDF file on the product CD and can be downloaded from our website
(p. 5).
To Next Page
Loading...
