PI C-863 - Maintenance; Cleaning the C-863; Updating Firmware - See Detailed User Manual

11 Maintenance
C-863 Mercury Controller MS205Equ Version: 2.0.0 83
In this Chapter
Cleaning the C-863 ...................................................................................................... 83
Updating Firmware - see detailed user manual........................................................... 83
11.1 Cleaning the C-863
NOTICE
Short circuits or flashovers!
The C-863 contains electrostatic sensitive devices that can be damaged by short
circuits or flashovers when cleaning fluids enter the case.
 Before cleaning, remove the C-863 from the power source by pulling the power
plug.
 Prevent cleaning fluid from entering the case.
 When necessary, clean the surfaces of the C-863 case with a towel that has
been lightly dampened with a mild cleanser or disinfectant.
 Do not use any organic solvents.
11.2 Updating Firmware - see detailed user manual
You can find information on this topic in the detailed MS205E user manual which is
included as a PDF file on the product CD and can be downloaded from our website
(p. 5).
11
Maintenance