PI C-863 - Operation; Motion errors - see detailed user manual; Data Recorder - see detailed user manual; Digital output signals - see detailed user manual

7 Start-Up
C-863 Mercury Controller MS205Equ Version: 2.0.0 61
Measuring the step response
1. In the main window of PIMikroMove, open the Data Recorder window via the
C-863 > Show/Hide data recorder menu item.
Figure 14: PIMikroMove: Show/Hide data recorder
Figure 15: PIMikroMove: Data recorder
2. With the Servo check box, make sure that the servo mode is switched on.
− If the Servo check box is not checked, the servo mode is switched off.
Check the check box to switch on the servo mode.