EasyManua.ls Logo

PIAGGIO 633929(IT) - Engine and Transmission Details

PIAGGIO 633929(IT)
314 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Engine
DATA
Specification Desc./Quantity
Type single-cylinder, four-stroke
Timing system single overhead camshaft chain driven on the left-
hand side, three-arm rocking levers set up with
threaded set screw
Bore x stroke 57 x 48.6 mm
Cubic capacity 124 cm³
Compression ratio 11.5 - 12.5 : 1
Air filter sponge, impregnated with mixture (50% petrol and
50% oil)
Starting system electric starter motor with freewheel
Lubrication with lobe pump (inside the crankcase) controlled
by a chain and double filter: mesh and paper
Fuel supply Unleaded petrol; depression carburettor, electric
pump or vacuum pump.
valve clearance intake: 0.10 mm - discharge: 0.15 mm
Engine idle speed 1,650±100 rpm
Max. speed 100 km/h
Transmission
TRANSMISSION
Specification Desc./Quantity
Transmission With automatic expandable pulley variator with tor-
que server, V belt, self-ventilating automatic cen-
trifugal dry clutch, gear reduction unit and trans-
mission housing with forced air circulation cooling.
Capacities
CAPACITY
Specification Desc./Quantity
Engine oil 1200 cm³
Rear hub oil Capacity ~ 150 cm³
Fuel tank capacity Tank capacity: ~12 l (approximate value)
Fuel reserve ~ 2.0 l (approximate value)
Cooling circuit Capacity: ~ 2.0 l
Electrical system
ELECTRICAL COMPONENTS
Specification Desc./Quantity
Ignition/advance Electronic, with inductive discharge and variable
advance with three-dimensional mapping
Spark plug NGK CR 8EB
Spark plug Champion RG 4 HC
Characteristics MP3 125
CHAR - 4

Table of Contents

Related product manuals