Pioneer MEP-7000 Service Manual

92
MEP-7000
1
2 3 4
A
B
C
D
E
F
1
2 3 4
If the results exceed the following maximum values, they will be judged as NG:
DVD
Max. 73 mA, Standard: 50 mA
CD Max. 80 mA, Standard: 70 mA
Note: As this unit is not equipped with a temperature sensor,
the following conditions must be met for accurate measurement:
- Measurement must be performed within 5 minutes after the unit is turned on.*
*If the unit is on, turn the unit off and let the unit sit with the power off for 3 hours or more.
- Ambient (environmental) temperature: 25 ± 5
Note: As the data are updated every 8 minutes, a maximum of 8 minutes will be discarded from the accumulated
time, depending on the timing of power-off. The discrepancy in the accumulated time varies depending on
the length of each power-on session, as shown below:
How to Judge
ACCUMULATE TIME of LD ON
The accumulated time of LD light emission
(during playback and pause) for DVDs and CDs is separately displayed in minutes.
0-1,196,032 minutes
Maximum recording time: 1,196,032 minutes (= 19,933 hours)*
*Once the maximum recording time is reached, that figure will be retained.
Unit of updating: Every 8 minutes
Power-on sessions of the unit Discrepancy per day
Discrepancy after 7,000 hours of use
A continuous 6-hour playback session per day
6 hours ± 4 minutes 7000 hours ± 77 hours
A total of 6 hours of playback with 3 power-on
sessions per day
6 hours ± 12 minutes 7000 hours ± 233 hours
How to Read Data

Pioneer MEP-7000 Specifications

General

Frequency range	4 - 20000 Hz
Channels quantity	- channels
Digital sound processing	- bit
Total Harmonic Distortion (THD)	0.006 %
Dimensions (WxDxH)	483 x 325 x 91 mm
Power consumption (typical)	33 W

Weight and Dimensions

Weight	6100 g