Pixsys ATR244 User Manual

54 - ATR244 - User manual
GROUP P -
d.i . 4
- Digital input 4
255 d.i.4.f. Digital Input 4 Function
Digital input 4 functioning.
diS a b. Disabled (Default)
2 t. s w. 2 Setpoints Switch
2 t.s w .i. 2 Setpoints Switch Impulsive
3 t.s w.i. 3 Setpoints Switch Impulsive
4 t.s w.i. 4 Setpoints Switch Impulsive
st./st. Start / Stop
rUn Run
HoLd Lock conversion (stop all conversions and display values)
tune Performing manual tune
a u . m a.i. Automatic / Manual Impulse (if enabled on parameter 48 or 67)
a u.m a.c. Automatic / Manual Contact (if enabled on parameter 48 or 67)
a ct.t Y. Action Type. Cooling regulation if D.I. is active, otherwise heating reg.
A.i. 0 Analogue Input 0. Set AI to zero
M. reS. Manual reset. Reset the outputs if selected as manual reset.
t.1.ru n Timer 1 run. The timer 1 count with activated D.I.
t.1. s. E. Timer 1 Start End. D.I. starts and stops the timer 1(impulsive)
t.1.S t a. Timer 1 Start. D.I. starts the timer 1(impulsive)
t.1.E n d Timer 1 End. D.I. stops the timer 1(impulsive)
t.2.ru n Timer 2 run. The timer 2 count with activated D.I.
t.2. s.E. Timer 2 Start End. D.I. starts and stops the timer 2(impulsive)
t.2.S ta. Timer 2 Start. D.I. starts the timer 2(impulsive)
t.2.En d Timer 2 End. D.I. stops the timer 2(impulsive)
Lo.cfG. Lock configuration and setpoints.
u p. k e y Simulates the functioning of up key.
d o w n.k. Simulates the functioning of down key.
fnc. k. Simulates the functioning of fnc key.
s et. k. Simulates the functioning of set key.
r em.s.e. Remote setpoint enabling. Enables Remote setpoint with activated D.I. Local setpoint
with deactivated D.I. (remote setpoint must be enabled on parameter 56 rem .s .)
256
d.i.4.c. Digital Input 4 Contact
Defines the resting contact of the digital input 4.
n.o pen Normally open (Default)
n.cLos. Normally closed
257
d .i .4. P. Digital Input 4 Process (only on ATR-ABC-T)
Select the size related to the digital input 4.
A.i n .1 Value read on input AI1. (Default)
A.i n . 2 Value read on input AI2.
MEAn Arithmetic average of the value read on inputs AI1 and AI2 [(AI1-AI2)/2].
d i F F. Difference of the values read on inputs AI1 and AI2 (AI1-AI2).
A b . d i f. Module of the difference of the values read on inputs AI1 and AI2 (|AI1-AI2|).
SuM Sum of values read on inputs AI1 and AI2 (AI1+AI2).
258
d.i.4.r. Digital Input 4 Reference Command
Defines the reference command for the digital input 4 functions.
cmd. 1 Command 1 (Default)
cmd. 2 Command 2
c m d.1. 2 Command 1 and 2
259÷262 Reserved Parameters - Group P
Reserved parameters - Group P

Pixsys ATR244 Specifications

General

Brand	Pixsys
Model	ATR244
Category	Controller
Language	English