EasyManuals Logo

Point Mobile PM60 User Manual

Point Mobile PM60
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
doivent être impérativement séchés avant la connexion à une source d'alimentation externe.
Les batteries doivent être chargées à une température allant de 0~45°C (± 3°C). Le non-respect de ces recommandations
pourrait avoir un effet néfaste sur la durée de vie de la batterie.
CAUTION:
After the battery has been charged, disconnect the DC Power Jack from the terminal. If you stay on that plug
in use, it is possible to break the power code.
ATTENTION
: Après une période de charge de la batterie, veillez à débrancher le connecteur du chargeur. Une utilisation
prolongée de celui-ci risquerait d’endommager le cordon d’alimentation.
NOTE:
Rechargeable battery packs are not initially charged. Therefore the first operation to perform is to charge them.
NOTE:
If you remove the battery pack or it completely discharges, you have 30 minute window of time to insert a charged
battery pack before the battery completely discharges.
3.3. LED Indicators
The red LED is ON while charging the battery and the green LED is ON when the battery is fully charged.
Alternatively, it is also possible to recharge the battery pack by using the single slot cradle, the single
Ethernet cradle or the 4-slot battery charger.
During the charging process the LED positioned at the upper side of the display is red constant. Once the
charging process has been completed this LED is green constant.
If the battery pack is removed from the handy terminal, it can be recharged by inserting it into the rear slot
of the single slot cradle, the single Ethernet cradle or the 4-slot battery charger.
3.4. Guidelines for Battery Pack Use and Disposal
The following are general guidelines for the safe use and disposal of batteries:
Store the terminal and the spare batteries between 20 to 30 ºC (68 to 86 ºF) in order to maintain
optimal battery performance.
Standard batteries must be charged at a temperature ranging from 0 to 45 (±3).
The battery level may not be displayed correctly for some minutes after the disconnection if the
handy terminal is disconnected from power supply before the charging cycle is completed.
The handy terminal could get warm during charging. This is normal and does not mean a
malfunction.
To achieve the best battery life, turn off the radios not in use.
Rechargeable battery packs is not initially charged. Therefore the initial operation to perform is to
charge them. See below.
By default, the battery pack is disconnected at the factory to avoid damage due to excessive
draining. Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and
ensures maximum performance.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Point Mobile PM60 and is the answer not in the manual?

Point Mobile PM60 Specifications

General IconGeneral
BrandPoint Mobile
ModelPM60
CategoryHandhelds
LanguageEnglish

Related product manuals