1.
Press and release the Power button to toggle the terminal in or out of Suspend mode.
☞
NOTE:
If the Power key setting has been turned off (disabled), pressing and releasing the key has no effect.
2.
Drag the to the any direction
☞
NOTE:
You should always place the terminal in Suspend mode before removing the battery.
To adjust the timeout limit, touch All Apps > Settings > Display > Screen timeout.
3.8. Using the Stylus
The terminal comes with a stylus included in a loop on the Lanyard. Use this stylus (or your finger) to
select or enter information on the touch screen. The stylus functions as a mouse; generally, a tap is the
same as a click.
Tap Tap the touch screen once to open menu items and select options.
Drag Hold the stylus on the screen and drag across the screen to select text and images.
Tap & hold Tap and hold the stylus on an item and a pop-up menu appears. On the pop-up menu, tap the
action of the task you want to perform.
WARNING:
Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel and
may cause damage not covered by the warranty.
AVERTISSEMENT :
L'utilisation d'objets, tels que trombones, crayons, stylos à encre sur l'écran tactile peut l’endommager et
causer des dommages non couverts par la garantie.
3.9.
Using File Explorer
Use File explorer to navigate through the files on your system. Tap All Apps > Tools > OI File
Manager
Press the file you want for a second and delete using the Delete button on the top of right.
Cut, Copy or Paste and set the application using Menu button on the top of right.
To install the application:
1. Put the Application file (.apk) the storage you want
2. Tap All Apps > Tools > OI File Manager
3. Press the Application file (.apk) on the OI File Manager.
4. If you see the Install blocked, press the Setting button and check the checkbox of Unknown sources.
5. Please do no.2 again.
6. Try install pressing Install button.
7. If set up success, “App installed” is shown on the screen.