Receiving Network Notifications
If Wi-Fi networking is turned On, you can set the terminal to notify you when an open network is
available.
1.
Touch All Apps > Settings > Wi-Fi.
2.
Press the Menu button on the bottom right, and then touch Advanced.
3.
Touch the check box to toggle Network notification On (checked) or Off.
Adding a Wi-Fi Network
1.
Touch All Apps > Settings > Wi-Fi.
2.
Verify the Wi-Fi is turned .
3.
Touch Add Network located at the bottom of the available Wi-Fi network list.
4.
Enter the Network SSID (Wi-Fi network name).
5.
For secure Wi-Fi network connections, touch None under Security, and then select the
type of
security protocol required from the pop-up menu (e.g., WEP, WPA/WPA2 PSK
or 802.1xEAP).
6.
Enter any additional security information required by the type of security protocol selected.
7.
Touch Save.
10.7.2
Advanced Wi-Fi Settings and Network Utilities
Advanced Wi-Fi Menu
The Advanced Wi-Fi menu provides access to set network notifications, modify Wi-Fi radio
activity
during Suspend mode, idle timeout settings, or view the terminal MAC address and IP
address.
•
Network notification
Turn on or off available Wi-Fi network notification.
•
Keep Wi-Fi on during sleep
Set how the Wi-Fi radio reacts when the terminal enters sleep (Suspend) mode (i.e.,
Always, Only when plugged in, or Never).
•
Wi-Fi idle timeout.
Adjust how long the Wi-Fi may be idle before the radio is automatically turned off (i.e., 1
minute, 3 minutes, 15 minutes (default), 30 minutes, 1 hour, or 3 hours)
•
MAC address
•
IP address
To access the advanced Wi-Fi menu settings:
1.
Touch All Apps > Settings .
2.
Under Wireless & Networks
,
touch Wi-Fi.
3.
Press the Menu button on the bottom right.
4.
Select Advanced.
10.8
WLAN (802.11 b/g/n Radio)
HANDY TERMINAL has a 2.4 GHz 802.11 b/g/n WLAN (Wireless Local Area Network) radio that
uses Direct Sequence Spread Spectrum (DSSS) technology. The radio is interoperable with other
To Next Page
Loading...
