EasyManuals Logo

Point Mobile PM60 User Manual

Point Mobile PM60
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
1.
Tap All Apps > Settings > Bluetooth
The Bluetooth Handler appears on the screen.
2. Tap Search for Devices button at the bottom.
The available services of all devices / profiles in range display in the Bluetooth Handler.
11.3
Pairing Bluetooth Devices
Connecting Bluetooth devices usually requires that they be paired; the same passkey must be
entered for each device. If you want to connect the HANDY TERMINAL to a device without any input
method (e.g., printers, headsets), refer to the user documentation that accompanied the device for
pairing information.
1. Tap on the desired device / profile in the Bluetooth Handler.
2. Tap the Pair Button at the bottom
Once asked if you need to authenticate the device,
3. Enter 4 random digits and tap the Next button. (If there is no Password, it is no needed)
4. Enter the same digits on the other device when prompted.
5. After pairing, tap on the icon of the selected device / profile and select Active.
11.4
Setting Up a Bluetooth Printer
1. Make sure that the Bluetooth printer is on and activated.
2. If not done so already, turn Bluetooth On (by selecting the vertical arrow on the Status Bar).
3. Tap Search for Devices, which runs a Bluetooth Inquiry, then SDP Query.
4. If you see your Bluetooth printer device displayed. You can press the Refresh button to search
again.
12 Single Slot cradle/Single Ethernet cradle Device
NOTE:
The cradle is option accessory and needed to purchase separately with incidental expenses in the aftermarket
12.1
Overview
NOTE:
The information in this chapter applies to both the Single Slot cradle and Single Ethernet cradle devices unless
otherwise indicated.
As the hub of your HANDY TERMINAL system, the Single Slot cradle charging and communication
cradle supports full-speed USB 2.0 with a workstation. The Single Ethernet cradle is identical to the
Single Slot cradle except it supports Ethernet communication as well as full-speed USB 2.0
12.2
Battery Charging
The base should complete a full charge of the battery pack in 5 hours for the standard
capacity 4000mAh: 60-BTSC pack on the handy terminal. .

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Point Mobile PM60 and is the answer not in the manual?

Point Mobile PM60 Specifications

General IconGeneral
BrandPoint Mobile
ModelPM60
CategoryHandhelds
LanguageEnglish

Related product manuals