The MicroUSB connector on bottom side supports USB 2.0 High speed
Wireless Radios (Wireless Communication)
HANDY TERMINALs can be equipped with an 802.11b/g/n Bluetooth radio and WWAN.
For more information, see Wireless Radios on paragraph 10.6.
10.2
Communication Type
The HANDY TERMINAL supports the following type of communication via USB through its I/O
connector on the bottom panel:
USB The USB cable and hardware peripherals allow the Handy Terminal to communicate with a
workstation through a USB port or to a network through a USB hub. The Handy Terminal supports
high -speed USB communication (USB 2.0); maximum data transfer rate is 480 Mbps. The Handy
Terminal defaults to USB communication out of the box.
10.3
Hardware Requirements for Setup
• AC Adaptor (if needed)
• USB Cable (for USB communication)
• Windows XP, Windows Vista, Windows 7 computer.
10.4 Connect to a Windows computer via USB
You can use a USB cable to connect your phone to a Windows computer and transfer music,
pictures, and other files in both directions. This connection uses the MTP protocol.
If you are using USB tethering, you must turn that off before you can use USB to transfer files
between your tablet and computer.
When you connect your phone to the USB port on your computer, its USB storage is mounted as a
drive and appears on your computer screen. You can now copy files back and forth as you would
using any other external device.
When you're finished, simply disconnect the phone by unplugging the USB cable
USB Connection Settings
To Next Page
Loading...
Need help?
General
