Enter Performs the same function as the Enter key on a workstation.
Power Suspends and resumes the terminal.
Scan Activates the image engine to scan a bar code or take an image.
Soft(Left/Right) Button move of Task Bar of bottom (Left/Right)
5.4
Alpha/Numeric Modes
The keypad defaults to numeric mode. Use the ALPHA key to toggle between numeric and alpha
modes.
Pressing the ALPHA key once locks the keypad in numeric mode, alpha mode (lowercase), or alpha
mode (uppercase).
The status bar on the screen displays an icon that indicates the alpha/numeric status of the keypad.
Icon Keypad Status
Lowercase alpha mode.
Uppercase alpha mode.
Numeric mode.
5.5
White Indicators on the Numeric Keys
(Please refer to Pointmobile Keyboard Specification v1.5 document)
The mode is changed as Numeric / Upper / Lower when you press the white key, you can type each
number/ capital letter/small letter in the sequence
Each number key display the characters typed when you press that key in alpha mode.
Note that when typing in alpha mode, you must use the same multi-press method you would use
when typing letters on a phone keypad. Each key press types the next letter in the sequence as
displayed by the alpha indicator.
5.6
BLUE Key Combinations
Buttons can be programmed to execute different functions using the Program Button program in the
Control Panel. The following buttons on the HANDY TERMINAL are programmed for the listed
function.
BLUE key modifies the next key pressed to perform specific functions.
To Next Page
Loading...
Need help?
General
