9.1.1 Wireless & Networks Settings
Under the Wireless & Networks heading on the Settings screen there are options for
turning the
on board wireless radios in the terminal on or off and for configuring network
connections.
See 10.7.1. Wi-Fi Network Connections on page XX and 11. Bluetooth Handler on page XX
9.1.1.1
Ethernet Cradle Settings
It is shown the network information to connect to Ethernet Cradle.
(IP
Address, NetMask, Gatway, DNS1, DNS2, Hardware address)
It can be set up the Automatic IP or Static IP on the Connection.
☞
NOTE:
The cradle to use Ethernet is marked icon on the status bar. Also if
Ethernet is connected, icon is changed as
9.1.1.2
More
.
Airplane Mode
Turn On Airplane mode to disable all the terminal radios that transmit voice or data.
☞
NOTE:
Another way is touch and hold the status bar, and then drag down to open the Notification
Panel. And touch the button on the top right of the Notifications panel. Touch next to
Airplane Mode.
When Airplane Mode is turned on,
shows on the status bar.
To Next Page
Loading...
Need help?
General
