POLA Xfarm User Manual

27
C. Settings
The change of the set of the Heating implies changes in other settings related to this set, according to
the following scheme:
The change of the set of the Ventilation implies changes in other settings related to this set, according
to the following scheme:
FLAP
1
When this parameter has a
negative value, it’s deducted
from the Ventilation set.
Flap 2 relative set
*1
FLAP
2
Flap 1 relative set
*1
Step 1
relative set
*2
STEP
1
STEP
0
STEP
2
Continua fino a..
STEP
10
Step 2
relative set
*2
Step 10
relative set
*2
Ventilation
Set referred to the Ventilation set programmed in Settings>Climate
This Set can be set by Calendar (see par. C.4.1)
Ventilation temperature probe
Flap temperature
of the relative probe
HEAT
2
HEAT
1
Heating 1 (relative set)
*
Heating indoor temperature
of the relative probe
Heating
Set referred to the Heating set programmed in Settings>Climate
This Set can be set by Calendar (see par. C.4.1)
When this parameter has a
negative value, it’s deducted
from the Heating set.
Heating 2 (relative set)
*
HEAT
3
Heating 3 (relative set)
*
*
See par. D.1.1
*2
See par. D.1.2.3
*3
See par. D.1.1.1

POLA Xfarm Specifications

General

Brand	POLA
Model	Xfarm
Category	Controller
Language	English