POLA Xfarm User Manual

57
Humidity start set
(Range: 0
%
...100
%
)
Temp. stop relat. set
(Range: -30.0°...-5.0°...30.0°)
On time
(Range: 0
m
.00
s
...60
m
.00
s
)
Off time
(Range: 0
m
.00
s
...60
m
.00
s
)
Humidity differ.
(Range: 0
%
...2
%
...10
%
)
Temp. differ.
(Range: 0.0°...0.2°...30.0°)
HUMIDIF
BLOCK
Conditions
ON UMIDIF
OFF
ON
Temp.stop relat. set
With negative setting the value is deducted
from referring Set (Ventilation).
Ventilation
Set referred to the Ventilation set as programmed in Settings>Climate
This Set can be set by Calendar (par. C.4)
Ventilation
temperature probe
Temperature
differ.
Set of the humidity control (absolute setting). If the RH reading is
below this setting the humidification control will be on.
Temperature stop of Humidification referred to the Ventilation set
as programmed in Settings>Climate (par. C.1).
Below this set the Humidification is off.
On time Humidification.
Off time Humidification.
Humidity differential.
Temperature differential.
Minimum Temperature Block on Humidification system
The temperature control switches the humidification off in case it goes below the minimum indoor
temperature.
D. Installation - Humidification
D.1.6 Humidification
Path: Home> Installation> Climate> Humidification
The %Rh control activates the Humidification in case of low indoor %Rh, the temperature control
switches the humidification off in case it goes below the minimum indoor temperature.
* ON HUMIDIFICATION
Controlled by
ON HUMIDIF. BLOCK
for low indoor temperature
HUMIDIF
OFF
ON*
ON*
Continue
ON*
OFF
ON*
OFF
OFF
Ambient
humidity
Humidity start set
Humidity
differ.
With set On time= different from 0
m
.00
s
and On time= different from 0
m
.00
s
Humidification is operated by
timer mode with respective On and Off time (set like On time and Off time).

POLA Xfarm Specifications

General

Brand	POLA
Model	Xfarm
Category	Controller
Language	English