85
F. Check Control
F.1 Climate blocks
Path: Home> Check control> Climate blocks
This screen gives the situation of the Climate blocks state and also shows the current conditionings (if any).
Max number of blocks displayed is 10.
Each block intervention is displayed in the Zoom 1...4 pages (Block state).
Ventilation blocks
Minimum ventilation See par. C.1
Maximum ventilation See par. C.1
Temporary change of ‘Ventilation’ set See par. C.1.F
Change of ‘Ventilation’ set by indoor humidity See par. D.1.3.6.1 - D.1.3.6.2
Reduction of ‘Ventilation’ set by CO2 See par. D.1.3.6.4
Reduction of ‘Ventilation’ set by NH3 See par. D.1.3.6.4
Maximum Step by outdoor temperature See par. D.1.3.6.6
Change of ‘Ventilation’ set by night condition See par. D.1.3.6.7
Cool maximum humidity See par. D.1.4
Humidification minimum temperature See par. D.1.6
Air exchange blocks
Temporary change of ‘Air exchange’ set See par. C.1.F
Minimum On See par. D.1.3.2
Reduction of ‘Air exchange’ set by outdoor temp. See par. D.1.3.6.3
Air changes rotation See par. D.1.3.2
Heating blocks
Temporary change of ‘Heating’ set See par. C.1.F
Change of ‘Heating’ set by night condition See par. D.1.1.2.1
Flap blocks
Minimum opening See par. D.1.2.1
Increase of ‘Pressure set’ by outdoor temperature See par. D.1.2.6.1
To Next Page
Loading...
Need help?
General
