76
D. Installation
D.D Bootstrap
Path: Home> Installation> Bootstrap
Procedure of Bootstrap.
The 'bootstrap' procedure resets all the setting in the Xfarm back to those as originally set at the
factory.
Bootstrap password setting (4 digit).
Bootstrap password
D.C Configuration
Path: Home> Installation>> Configuration
See Xfarm Configuration Handbook.
These parameters control the working mode of the system and are protected by a dedicated password.
See Xfarm Configuration Handbook.
To display the working parameters, see par. F.F.
ATTENTION: the 'bootstrap' procedure will delete all the settings, made by the user,
since the Xfarm was installed.
To bootstrap Xfarm the manufacturer activation code is required.
D.E Network connection
Path: Home> Installation> Network connection
D.E.1 485 node number
Path: Home> Installation> Network connection> 485 node number
Nodal number of this processor in the PC 485 network.
Warning: do not use same number of two different processors!
To Next Page
Loading...
Need help?
General
