71
D. Installation - Bird weighing
D.3.2 Plate calibration
Path: Home> Installation> Animal weighing> Plate calibration
Plate calibration
By this procedure you can calibrate the weighing system.
Make sure the weigher is clear and the readout = 0 (if not then perform
the 'Tare' procedure). Place a known weight on the plate.
If the displayed weight, above, does not match the weight expected,
adjust the displayed weight, using the Decr or Incr keys, to the known
weight value. Press Enter to confirm or Exit to quit without saving.
To Next Page
Loading...
