Polycom realpresence group series

Polycom, Inc. 169
Control and Navigation
You can customize how the remote control works, set up various controllers for the system, and set the date
and time on your system. See the following topics for more information:
● Configure Remote Control Behavior
● Connect Control and Accessibility Equipment
● Enable and Set Up the RealPresence
Touch
● Set Up the Polycom Touch Control
● Enable SmartPairing
● Configure Contact Information
● Configure Regional Settings
● Configure Sleep Settings
Configure Remote Control Behavior
You can customize the behavior of the remote control to support the user’s environment. Keep in mind the
following regarding remote control behavior:
● If the Polycom RealPresence Group system is paired and connected with either a RealPresence
Touch or a Polycom Touch Control, the remote control is disabled.
● The Polycom RealPresence Group system remote control IR transmits a modulated frequency of
38 kHz.
● When a USB keyboard is connected to a RealPresence Group system, you can enter only numbers
with the remote control on the local interface's Place a Call > Keypad or Place a Call > Contacts
screens.
To configure remote control behavior:
1 In the web interface, go to Admin Settings > General Settings > System Settings > Remote
Control, Keypad, and Power.
2 Configure these settings.